Snow Removal Truck YHCX-A-zhengzhou yihong snow removal truck

Snow Removal Truck YHCX-A:
This snow removal truck is along with snow blade mounted on its front end and a salt spreader on the back of the vehicle. The intelligent control signal achieves wireless connection, so that the operation can be done in the cab.
Snow Removal Truck YHCX-A Features:
1. This snow removal truck integrates melting snow with spreading grit.
2. This vehicle is based on Dongfeng 4WD chassis, with strong power, high snow removal efficiency, and reliable operation.
3. The snow blade has a unique obstacle avoidance function, ensuring the safe and reliable operation.
4. The snow blade is driven by hydraulic system to move up and down and turn, characterized by flexible operation and easy detachability.
5. The spreader can intelligently and automatically regulate the spreading width, the amount of grit, and the driving speed, with the measurement stable, accurate, and reliable.
6. The spreader has adopted with antiseptic treatment, completely avoid acid corrosion
7. The spreading disk is made of stainless steel, and can be folded up, easy emptying the remaining snow melting agent.
8. Along with loading and unloading legs, can be completed the loading and unloading movement without auxiliary toplift.
9. The intelligent control signal achieves wireless connection, so the operation can be done in the cab.
10. The power unit adopts a generator set, which is highly efficient, energy efficient, environment friendly, and with permanent magnet.
11. Equipped with nonskid tire, lighting and warning lamps, which provides safety operating environment.
Snow Removal Truck YHCX-A Technical Parameters:
Model YHCX-A
Chassis:
Chassis Model DFL1140B1
Drive Form DongFeng 4WD
Engine model ISDe185 30(Cummins Engine)
Fuel type Diesel
Emissions based on Standard GB3847-2005,GB17691-2005,Eurp.Ⅲ
Dimensions (L*W*H) 7090*2370*2760 mm
Snow blade:
Width of the blade 3000 mm
Weight with blade 880 kg
Maximum deflection angle  ±30°c
Adjustment angel of tilt  ±5°
Avoidance mode Spring Avoidance
Avoidance height ≥ 200 mm
Spreader:
Volume 6m3
The Form of Transport material Belt Conveyor
Spreading width 4-20 m（adjustable）
Spreading capacity 20~150g/m2（adjustable)
Maximum spreading speed 40 km/h
zhengzhou yihong snow plow, snow thrower

Tractor Snow Plow YHQLS-2500B

Tractor Snow Plow YHQLS-2500B:
This tractor snow plow is based on a high powered tractor, with a snow blade mounted on its front end and a snow rotary broom mounted on its rear, which makes the snow removal rate up to 95%.
Tractor Snow Plow YHQLS-2500B Features:
1. Equipped model SL3105BT tractor, strong driving force.
2. This tractor snow plow removes snow very fast, with cost low and operation reliable.
3. This tractor snow plow integrates the snow blade with the powerful snow sweeper, making the snow removal rate up to 95%.
4. The snow blade features a moldboard, with the discharge angle adjustable in double directions; the snow blade is 2400mm wide and it can be angled left or right greater than or equal to 30°.
5. This tractor snow plow is driven by hydraulic system, with operation safe and reliable.
6. The plowing width is 2000mm.
7. The working speed is greater than or equal to 20km/h.
Tractor Snow Plow YHQLS-2500B Technical Parameters:
Model YHQLS-2500B
Tractor
Tractor Engine Model SL3105BT
Engine water-cooled, four-stroke diesel engine
Rated Power 29.4 kw
Rated speed 2200 r/min
Rated Traction Force 10320 N
Snow Blade 
Width 2400 mm
Snow blade width 2000 mm
Snow blade height 800 mm
Working speed 20 km/h
Snow blade pattern Flexible cutting edge
Discharge angle 30o
Avoidance mode Spring Avoidance
Drive mode Hydraulic drive
Snow Rotary Broom 
Brush Width 2500 mm;2600 mm;2800 mm
Max deflection angle: 30o
Brush material PP(Propene Polymer)
Brush axle material Seamless steel
For more information regarding Snow Plow, feel free visit our website and send us mail at - yihong.machine@yahoo.com our website:http://www.yhsnowplow.com

Snow Blade for Loader YHZCX-3.8C

Snow Blade for Loaders YHZCX-3.8C:
Snow blade for loader is specially used for cleaning snow in airport, highway and other complicated road, powerful and efficient, plusing a rubber flap bolted to the top of the blade to prevent "blow-over" of snow that affects operator visibility during high speed clearing.
Snow Blade for Loader YHZCX-3.8C Features:
1.The snow blade features a moldboard, with the discharge angle adjustable in double directions: it can be optionally angled left or right greater than or equal to 30 degrees.
2.The independent hydraulic drive system can work only required to hookup the automobile battery.
3.The operation can be done in the cab, safe and reliable.
4.The upper part of the snow blade is an integral structure; the trip function is achieved by a separated turning plate structure—in the case of any point on the cutting edge hitting an obstacle, the snow blade can go over the obstacle and eliminate itself from reversing when pushing big snow drifts, protecting the snow blade and the vehicle from damage; the maximum surmountable obstacle height is greater than or equal to 200 millimeters.
5.In the process of removing snow, the cutting edge of the blade is self-adjusting according to the cross slope gradient, facilitating the clearing operation.
6.The installation and removal of the snow blade is convenient and quick.
Snow Blade for Loader YHZCX-3.8C Technical Parameters:
Model YHZCX-3.8C
Dimension 3800*2000*1100 mm
Width 3.8m(Adjustable)
Cleaning Width ≥ 3.29m
Weight 1700 kg
Operating speed ≥ 30 km/h
Avoidance way Blade Spring avoiding
Turning Angle ≥30o
Slope angle ±5o
Avoidance height 260 mm

Snow Blade for Pickup YHCX-QQC2.0

Snow Blade for Pickup YHCX-QQC2.0 :
YHCX-QQC Series Snow Blade are for your pickup, van, Jeep or SUV as well as ATV, with mounting brackets that are custom made for each vehicle and features a remote control to raise and lower the blade.Complete with hydraulics.
Snow Blade for Pickup YHCX-QQC2.0 Features:
1. The blade can be adjusted in two directions, with the max. deflection angle of 30 degree.
2. Operating in the cab, reliable and safe.
3. The blade can adjust automatically according the gradient of the road.
4. Easy to be installed and uninstalled.
5. With reasonal instructure, the blade can push the snow to the side of the road.
6. With independent lighting, convenient for working at night.
7. The blade adopts the overturn avoidance way, and the blade body can overturn when the blade meet obstacles during the working, so as to protect the blade and vehicle from damaging or deforming. The max avoidance height is 260mm.
Snow Blades for Pickup YHCX-QQC2.0 Technical Parameters:
Model YHCX-QQC2.0
Dimension 2000*1200*1150 mm
Width 2.0m (Adjustable)
Cleaning Width ≥1.73m
Weight 300 kg
Operating speed ≥ 40 km/h
Applicability 1.5-5ton truck
Avoidance way Overturn avoidance
Max Turning Angle 30degree
Avoidance height 260 mm

zhengzhou yihong snow plow.

Truck Spreader YHRS: YHRS-4.0,YHRS-6.0,YHRS-8.0

Truck Spreader YHRS:
This truck spreader is suitable for melting snow and ice on high class highways, urban roads, squares, airports, scenic spot, etc. The truck spreader is made of carbon steel plate and stainless steel structure that has gone through Sa3 anticorrosion treatment.
Truck Spreader YHRS Features:
1. This truck spreader can spread salt, snow melting agent, and etc.
2. The spreading width, spreading capacity and driving speed are achieved by intelligent automatic control, with the measurement stable, accurate, and reliable.
3. This truck spreader is built with carbon steel plate or stainless steel structure, which has gone through Sa3 anticorrosion treatment.
4. The power unit is chosen to use national famous brand generator.
5. The intelligent control signal achieves wireless connection, so the operation can be done in the cab.
6. This truck spreader uses auger delivery or belt delivery, with operation easy and performance reliable.
7. A mobile mesh is set up over the top of the spreader body case to prevent large particles and foreign objects from entering the facility, ensuring the safety of the equipment.
8. The rain hood over the hopper can guarantee the overall unit to work in rainy and snowy days
9. Equipments are available in bundled products, combining all sorts of modes (hydraulic drive or electric drive) with a variety of specifications (1/4/6/8/10m3), to customize individual needs.
Truck Spreader YHRS: YHRS-4.0,YHRS-6.0,YHRS-8.0 Technical Parameters:
Model YHRS-4.0
Dimensions 4060×2000×1620mm
Volume 4 m3
Weight 1.5 t
Feed delivery Auger delivery
Spreading capacity 20-150g/ m3 Adjustable
Spreading height Adjustment altitude 0~500 mm
Drive speed ratio 40:1
Spreading width 3-12m Adjustable
Working speed 15-40(km/h) Adjustable
Engine 186FG/6.3kw
"A" series stand for intelligent hydraulic control
"B" series stand for hydraulic control

Model YHRS-6.0
Dimensions 5500×2000×1900mm
Volume  6 m3
Weight  2.3 t
Feed delivery Belt delivery
Spreading capacity 20-150g/ m3 Adjustable
Spreading height Adjustment altitude 0~500 mm
Drive speed ratio 40:1
Spreading width 3-12m Adjustable
Working speed 15-40(km/h) Adjustable
Engine 186FG/6.3kw
"A" series stand for intelligent hydraulic control
"B" series stand for hydraulic control
Model \HRS-8.0
Dimensions 5500×2000×2100mm
Volume 8 m3
Weight  2.4 t
Feed delivery Belt delivery
Spreading capacity 20-150g/ m3 Adjustable
Spreading height Adjustment altitude 0~500 mm
Drive speed ratio 40:1
Spreading width 3-12m Adjustable
Working speed 15-40(km/h) Adjustable
Engine 186FG/6.3kw
"A" series stand for intelligent hydraulic control
"B" series stand for hydraulic control
snow removal truck includes truck spreader, snow plow and rotary broom for snow removal.

Snow Plow for Truck YHQCX-3.0A features a moldboard, with the discharge angle adjustable in double directions

The snow plow for truck features a moldboard, with the discharge angle adjustable in double directions; the snow plow for trucks is 3.0 meters wide and it can be optionally angled left or right greater than or equal to 30 degrees. snow plow for trucks YHQCX-3.0A  are pushing the snow on the roadside, keeping road safty. snow plow for trucks for trucks are widely used for removing snow under the complicated road conditions and clearing the compacted snow. It is an ideal facility for cleaning snow on urban roads, high class highways, and airport in winter time.
Snow Plow for Truck YHQCX-3.0A Features:
1. The snow plow for trucks features a moldboard, with the discharge angle adjustable in double directions; the snow plow for trucks is 3.0 meters wide and it can be optionally angled left or right greater than or equal to 30 degrees.
2. The new type of hydraulic drive system can work only required to hookup the automobile battery.
3. The operation can be done in the cab, safe and reliable.
4. In the process of removing snow, the cutting edge of the blade is self-adjusting in accordance with the cross slope gradient.
5. The installation and removal of the snow blade is convenient and quick.
6. With a lighting system independent of the vehicle body, the snow plow for trucks is convenient for snow removal operation at nights.
7. Reasonably structured, the snow plow for trucks can throw snow out of the highway during the speedy snow removal operation, whereas it can push the snow to the roadside during slow snow removal operation.
8. The snow blade has a "trip" feature that, in the case of any point on the cutting edge hitting an obstacle, the snow blade will tip and go over it, effectively protecting the snow plow for trucks and the vehicle from damage—the maximum surmountable obstacle height is greater than or equal to 260 mm.
Snow Plow for Truck YHQCX-3.0A Technical Parameters:
Model YHQCX-3.0A
Dimension 3000*1260*1650 mm
Width 3.0m(Adjustable)
Cleaning Width ≥ 2.63m
Weight 560 kg
Operating speed ≥ 30 km/h
Applicability 5—10ton truck
Avoidance way Overturn avoidance
Max Turning Angle 30o
Avoidance height 260 mm
Snow Plow for Truck YHQCX-3.0A made by Zhengzhou Yihong Industrial Equipment Co., Ltd.
For more information regarding Snow Plow, feel free visit our website and send us mail at - yihong.machine@yahoo.com our website:http://www.yhsnowplow.com

Snow Plow for Airport YHQCX-A - yihong Snow Plow for Airport

Snow Plow for Airport YHQCX-A3.0:
Snow Plow for airport is specially used for cleaning snow in airport, the snow plow is fitted with soft cutting edge to protect the airport floor from damage.
Snow Plow for Airport YHQCX-A3.0 Features:
1. The snow plow features a moldboard, with the discharge angle adjustable in double directions: it can be optionally angled left or right greater than or equal to 30 degrees.
2. The independent hydraulic drive system can work only required to hookup the automobile battery.
3. The operation can be done in the cab, safe and reliable.
4. The upper part of the snow blade is an integral structure; the trip function is achieved by a separated turning plate structure—in the case of any point on the cutting edge hitting an obstacle, the snow blade can go over the obstacle and eliminate itself from reversing when pushing big snow drifts, protecting the snow blade and the vehicle from damage; the maximum surmountable obstacle height is greater than or equal to 200 millimeters.
5. In the process of removing snow, the cutting edge of the blade is self-adjusting according to the cross slope gradient, facilitating the clearing operation.
6. The installation and removal of the snow blade is convenient and quick.
7. With a lighting system independent of the vehicle body, the snow blade is convenient for snow removal operation at nights.
8. Reasonably structured, the snow plow can push snow to one side and function as throwing snow; in the process of clearing snow, the snowshed mounted on the snow plow can prevent the snow from crossing the blade, eliminating the possibility that the snow? Could sprinkle onto the windshield of the vehicle to affect driver's sight.
9. The snow plow is fitted with soft cutting edge to protect the floor from damage.
Snow Plow for Airport YHQCX-A3.0 Technical Parameters:
Model YHQCX-A3.0
Dimension 3000*1150*1600mm
Width 3.0m(Adjustable)
Weight 960 kg
Cleaning Width ≥ 2.63m
Max turning Angle 30
Slope angle ±5o
Operating speed ≥ 30 km/h
Avoidance height 200mm
Blade Avoidance way Blade spring avoidance
Applicability 5--8 ton truck 8--15 ton truck
zhengzhou yihong snow plow.

The truck spreaders are attached to the trucks and then dragged around the areas that need the coverage.

Whether the truck spreader is attached to the back of an ATV or a truck, most of them have power hookups such that they can be connected directly to the plug or the battery. No matter the size of your driveway you need to use one of the available salt spreaders for trucks because they guarantee you an even spread of salt while minimizing the mess. It can be tedious to throw salt with your hands especially if the driveway is large; one pas with these spreaders does it well.
The truck spreaders are attached to the trucks and then dragged around the areas that need the coverage. salt spreaders for trucks can be used for business or domestic use. They come in different models and they are rated by the amount of weight in salt they can hold. The can vary ranging from 330 pounds up to 825 pounds. Other spreaders with larger capacities are rated by how many cubic yards of salt they can hold.

Green Bay unveiled seven snow plows which had been painted by local school children

Winter is fast approaching are you ready for a Snow Storm be ready and get your truck and plows maitence checked and Safety checked. Be sure your lights,tools, battery and safety equipment are all up to handle the task.

Last week, the City of Green Bay unveiled seven snow plows which had been painted by local school children.  Here’s what they look like:

Painting snow plows in many respects seems counter intuitive.  As the news anchors joked, this will probably be an ongoing project since the paintings will probably get ruined in our big, bad frozen tundra winter.  But I absolutely loved the idea.  It shows that art can happen in the most surprising of places, and that when art is created, other good things happen.

4 Cycle snow blowers

4 cycle snow blowers are those that use a 4 cycle engine instead of a 2 cycle engine. While a 2 cycle engine uses a mixture of gas and oil to run, a 4 cycle engine requires only gas. Also known as a 4 stroke engine, this comes with separate strokes for power, exhaust, combustion, and intake.
Snowblowers with 4 cycle engines are stronger and more powerful, which is why they are often used in dual stage snow blowers. They are also usually more durable and are easier to start than 2 cycle engines. However, they are also heavier and bulkier. Most top-selling two stage snow clearing equipment these days sue 4 cycle OHV engines. These can cost anywhere between $400 and $1000, or even higher depending on the size, specs, and power of the machine. An OHV engine uses an overhead valve instead of side valves. An overhead valve is located on top of the cylinder.

This has a significant effect on the torque and starting power of an engine as well as on how much noise the engine makes while it runs. So while 2 cycle engines focus on horsepower, 4 cycle engines focus on torque. The added torque is very useful in a two stage snowblower because it can help move heavier snow more effectively.

zhengzhou yihong Snow removal truck ready for winter snow removal work

zhengzhou yihong snow removal equipment are : snow, multi-functional sprinkler, salt spreader, heavy snow blade large machinery pushed snow shovel ready, light snow blade special vehicle push snow shovel, widely used in high - road, City Road, airport, square, scenic roads and winter snow. Currently, snow removal equipment market has been covered in Shanxi, Shaanxi, Hebei, Heilongjiang, Jilin, Xinjiang, Gansu, and other provinces in the 80 percent of the country. Meanwhile, in order to protect the old and new customers winter snow removal equipment work well under way, zhengzhou yihong has recently been contacting new and old customer contact for maintenance, winter snow to ensure customer work smoothly has laid a solid foundation.

ZLJ5250TCXZE3 type of snow removal vehicles will be unveiled in Beijing, China BICES Eleventh Exhibition

ZLJ5250TCXZE3 type of snow removal vehicles is Zoomlion adhering to the "real-time in addition to snow, ice and snow in addition to green" concept, follow the "snow for the order, that is, that is, except under, snow sparse Road, Xueting Lu Chang," the policy of the city snow removal and emergency rescue , developed a set of push snow, high-speed snow, solid spreading, pre-wet spreading, scraping ice and other multi-functional comprehensive snow removal vehicles. In recent years, Hunan and Guizhou, the battle against snow and ice, played a significant role;

Multi - function type snow removal machine

Multi - function type snow removal machine selected 50-90 chassis of tractor - driven, a shovel, throwing, vibration, scratch, sweeping and many other features of joint type snow removal machinery, clear variety of thick, thin, soft or hard snow and ice, at the same time completing loading operations. Host at the same time equipped with three kinds of snow removal equipment, also can choose individual or joint operations.

Is imperative to develop cheap efficient environmental - friendly deicing salt

Develop cheap efficient environmental - friendly deicing is a matter of urgency. For example, in the snow - melting salt corrosion inhibitor for Riga, but corrosion inhibitor for nitrite, can only be used for reinforced concrete bridges and cannot be used for non - Bridge Road, once into the soil and can contaminate ground water, so there's no environment. In the organic matter in the second, more cheap alcohol there is good snow melting effect, and not to damage plants and corrosion of steel, but because the amount of costly and difficult to spread. Therefore, the cheap harmless in research and development of new environment - friendly deicing salt to go!
zhengzhou yihong truck spreader can spread salt, snow melting agent, and etc.Hopper spreader YHRS is built with carbon steel plate or stainless steel structure, which has gone through Sa3 anticorrosion treatment.

With two patents of snow blade

With two patents of snow blade
Patents : one of the triangle of spring wall system. Case of pavement obstructions such as extrude covers or bridge expansion joint part when turning shovel and spade plates have no overall beating. And shovel Board form a 75 ° angle with the ground, snow can eradicate relative compacted snow.
Technology patents II : vertical shaft - damping dynamic balance system. When the primary when the car balance, the system allows large shovel and ground balance forever and shock - absorbing protection. It is more advanced than the plate balance, noise, and not easily damaged.

Featurers of Ice breaker machine

Features of Ice breaker machine
A. independent hanging and rolling device and the surface is manganese steel and high temp cementite material, the blade has the function of disassembling and replacing
B. Equipped with absorber and could avoid the destruction of blade
C. ice breaker with flexible install and disassemble function
D. independent shovel behind roller devices and power units which could be 30°-36°with block avoidance function 　
E. Break, smash, shovel and push functions.
F. Wireless remote control system

The salt spreader's structurer of Multi-functional snow removal truck

The salt spreader of Multi-functional snow removal truck part of power plant used secondary engine driven hydraulic system , module of Qian reset concentrated design , 11 cubic large volume material warehouse , and installed filter device , effective filter impurities , while has prevent expansion material device ; conveying device used stainless steel material , can effective of anti - corrosion , and used chain type conveying way , to prevent skidded , guarantee conveying correct of sub cloth volume ; machine computer control , under set sub cloth volume , dang road speed occurs changes Shi , corresponding of sub cloth speed also occurs changes , entire construction job just a people to in cab within completed , operation simple convenient .
In addition, the device can achieve solid spreading, spreading can also implement solid - liquid mixture, at the same time on the spreader with ejector, easy loading and unloading of equipment to facilitate storage management, realize the multifunctional use of the device.

Characteristics and uses of the driving snow plow

The driving snow plow is large, strong, adaptive, versatile and efficient. Equipped with powerful 624cc displacement of double - cylinder four - stroke petrol engine, snow blade equipped with the width 1800 mm, enough to cope with fast clear of snow, sturdy frame and loading bucket to load carrying 100 kg of goods effectively. More electric tipping equipment, hair dryer device, rear lights, special tires, seats, monitor, choose another device.

Hefei obligations snow plow removal snow on the road is busy

On January 30 , 2008 , in recent days of Blizzard cause province road Shang stacked has large of snow , because temperature low , road ice , to Anhui Hefei traffic brings has is large of effect , to makes road early smooth , convenient vehicles and pedestrian of travel , city General cadres , and sanitation workers and large public have on street obligations shovel snow , also has enterprise and personal to own for sales of excavator and bulldozing car adapted into snow plow open Shang Street , obligations help shovel snow .
It is learned that, to date, in the territory of Yaohai District of engineering machinery vehicle participating in voluntary snow there were 9.