Snow Plough for Loader YHZCX-3.8C produced by zhengzhou yihong

Snow Plough for Loaders YHZCX-3.8C:
Snow Plough for loader is specially used for cleaning snow in airport, highway and other complicated road, powerful and efficient, plusing a rubber flap bolted to the top of the Snow Plough to prevent "blow-over" of snow that affects operator visibility during high speed clearing.
Snow Plough for Loader YHZCX-3.8C Features:
1.The Snow Plough features a moldboard, with the discharge angle adjustable in double directions: it can be optionally angled left or right greater than or equal to 30 degrees.
2.The independent hydraulic drive system can work only required to hookup the automobile battery.
3.The operation can be done in the cab, safe and reliable.
4.The upper part of the snow blade is an integral structure; the trip function is achieved by a separated turning plate structure—in the case of any point on the cutting edge hitting an obstacle, the snow blade can go over the obstacle and eliminate itself from reversing when pushing big snow drifts, protecting the snow blade and the vehicle from damage; the maximum surmountable obstacle height is greater than or equal to 200 millimeters.
5.In the process of removing snow, the cutting edge of the blade is self-adjusting according to the cross slope gradient, facilitating the clearing operation.
6.The installation and removal of the snow blade is convenient and quick.
Snow Plough for Loader YHZCX-3.8C Technical Parameters:
Model YHZCX-3.8C
Dimension 3800*2000*1100 mm
Width 3.8m(Adjustable)
Cleaning Width ≥ 3.29m
Weight 1700 kg
Operating speed ≥ 30 km/h
Avoidance way Blade Spring avoiding
Turning Angle ≥30o
Slope angle ±5o
Avoidance height 260 mm